New Refrigeration Efficiency Standards To Take a Bite out of Supermarket and Restaurant Energy Costs

Joanna Mauer, Appliance Standards Awareness Project

The Department of Energy has issued a final rule for strong new efficiency standards that will take a big bite out of the energy consumption of the refrigerators

and freezers used in supermarkets, convenience stores, restaurants, and commercial kitchens. The significant reductions in energy use that we’ll see with the new standards are made possible by the availability of technologies including LED lighting and occupancy sensors, high-performance glass doors, and high-efficiency motors, which all provide big efficiency gains.DOE estimates that commercial refrigerators

and freezers meeting the new standards sold over thirty years will reduce U.S. electricity consumption by about 340 billion kWh and save businesses $12 billion. The new standards will also reduce CO₂emissions by 142 million metric tons, which is equivalent to the annual emissions of 30 million cars.The first national standards for commercial refrigeration equipment

were enacted as part of the Energy Policy Act of 2005 (EPAct 2005) and were based on earlier state standards adopted by California and eight other states. These initial standards applied to “reach-in” refrigerators and freezers, which are typically used in food-service establishments. In 2009, DOE completed a final rule which set the first standards for equipment not covered by EPAct 2005, namely refrigerated display cases commonly used in supermarkets. The new standards issued today will achieve large cost-effective energy savings compared to products meeting the initial standards. The new standards will reduce energy consumption by more than 40 percent for solid-door “reach-in” refrigerators and freezers, and by 28 percent and 12 percent for glass-door supermarket refrigerator and freezer cases, respectively.These reductions in energy consumption will translate into big savings for businesses that purchase commercial refrigerators

and freezers. For example, DOE estimates that the new standards will save purchasers of supermarket glass-door refrigerator and freezer cases more than $500 over the lifetime of a single case. (A typical supermarket has about 60 refrigerated display cases.)

For several types of commercial refrigerators and freezers, higher efficiency levels than those in today’s rule would be cost-effective for purchasers and would achieve additional energy savings. However, the standard levels adopted by DOE capture the vast majority of the cost-effective energy savings.

Both the current standards and the new standards issued today include separate efficiency levels for open and glass-door cases. For the new standards, DOE did not analyze the potential energy savings from installing glass doors on open refrigerated cases. While some supermarkets have started to replace open cases with glass-door cases, roughly 50 percent of display cases in a typical supermarket are still open cases. Open cases often make supermarket aisles uncomfortable for customers and do not preserve food as well as closed cases, in addition to wasting a significant amount of energy. Typical supermarket refrigerator and freezer cases without doors sold today use three to four times as much energy as cases with glass doors.

Replacing open cases with glass-door cases and retrofitting open cases in stores to add doors represents a significant energy savings opportunity beyond the savings that will be achieved by today’s rule.

It’s good to see that DOE is starting to catch up on overdue standards. (The statutory deadline for the final rule for commercial refrigeration equipment

was January 1, 2013.) Back in August, DOE sent a letter to New York State’s attorney general and others committing to a schedule for completing four overdue rules, including the rule for commercial refrigeration equipment

. DOE issued a final rule for metal halide light fixtures in January, and the remaining two rules—for walk-in coolers and electric motors—are due in April and May, respectively.

These four rules will make an important contribution to meeting President Obama’s goal of reducing CO₂ emissions by 3 billion metric tons by 2030 through efficiency standards. ASAP recently launched a “tracker” to monitor progress towards meeting the CO₂ reduction goal and to track the total savings for consumers and businesses as a result of these new efficiency standards. Not counting today’s rule, efficiency standards adopted during the Obama administration will reduce CO₂ emissions by 1.8 billion metric tons by 2030 and will net consumers and businesses $370 billion in savings.

The new standards for commercial refrigeration equipment

will take effect in 2017.

Joanna Mauer is the technical advocacy manager at ASAP, which organizes and leads a broad-based coalition effort that works to advance, win and defend new appliance, equipment and lighting standards, which deliver large energy and water savings, monetary savings and environmental benefits.