All-renewable 5 MW Kalbarri microgrid goes live in Western Australia

Feb. 9, 2022
Western Australia has flicked the switch on an all-renewable microgrid that will have the ability, if required, for the town of Kalbarri.

of One Step Off The Grid reports on the activation of an all-renewable microgrid that will back up the unsteady grid connection in the Western Australia town of Kalbarri.

Western Australia has flicked the switch on one of Australia’s largest and most sophisticated microgrids, a 5 MW mix of solar, wind and battery storage that will have the ability, if required, to power the Mid West town of Kalbarri entirely with renewables.

The Kalbarri microgrid, which combines 1.6 MW of wind generation capacity, 1 MW of “mum and dad” rooftop solar and 2 MWh of battery storage, differs from most in that it has no fossil fuel backup. That’s because the microgrid, itself, is the backup – in this case, for the main grid.

Government-owned network company Western Power developed the microgrid in partnership with utility Synergy, the Shire of Northampton and the local community, to address ongoing reliability issues that have plagued the tourist town.

Kalbarri, which has roughly 1,500 residents and attracts more than 100,000 visitors a year, is connected to the state’s South West Interconnected System – Western Australia’s main grid – by a 140 km long rural feeder line from Geraldton.

This “infamous” line, as Western Power’s Aaron Fawcett describes it, is “very open to the elements and has given us a lot of trouble in the past,” namely regular and sometimes prolonged outages.

The new microgrid has been connected to the existing network infrastructure to help meet peak demand in the town during tourist season. But its more important role will be to take over the power supply, entirely, when the network connection is, inevitably, interrupted by storms, wind or sand.

For this role, the microgrid will use intelligent monitoring equipment to detect a fault in the system and respond to maintain power supply for the town, “islanding” it by drawing energy solely from the battery, the wind farm and feed-in from residential rooftop solar panels.

“The beauty of this particular BESS [battery energy storage] solution and the complexity around the management system of it is that it also detects when the network comes back online,” says Derrick Quick, the project manager for the microgrid.

“It will then disconnect from the battery and then reconnect to the grid.”

Western Power says the microgrid’s advanced monitoring system will detect even momentary outages, responding in milliseconds to maintain a seemingly uninterrupted power supply.

According to a project fact sheet, the changeover from grid to microgrid supply may trip some household appliances, but the majority should not be impacted and most customers should not even notice either the outage or subsequent reconnection.

Indeed, they might be none the wiser about future disconnections from the network, but for an automated notifcation sent to mobile phones so residents can adjust their power usage while the microgrid is operating, to make the most of the battery charge.

All told, the Kalbarri microgrid is expected to eliminate 80% of outages experienced by the town, and significantly reduce the length of outages depending on how the power is being drawn from the microgrid.

“The Kalbarri microgrid is an important step towards improving power reliability for the local community,” said state energy minister Bill Johnston, who oversees the Labor McGowan government’s Distributed Energy Resources Roadmap.

“It also paves the way in delivering greater renewable energy solutions across WA, particularly in regional areas, as we move forward in achieving net zero emissions by 2050.”

This article was originally published by One Step Off The Grid and was reposted with permission. Its author, 

About the Author

Guest Post

Exploring the Potential of Community Microgrids Through Three Innovative Case Studies

April 8, 2024
Community microgrids represent a burgeoning solution to meet the energy needs of localized areas and regions. These microgrids are clusters of interconnected energy resources,...

RR_101

An Introduction to Microgrids: Combining Multiple Power Sources for Maximum Efficiency and Uptime

In this white paper learn how to combine multiple power sources for maximum efficiency and uptime with a microgrid.